B7 Stud Machine
B7 Stud Machine
B-7 Stud machine from coils or full-bars■ The V-B7 line of machines is designed to Chamfer & Stamp Hi-tensile Studs (ie. B-7).
■ Each model has capacity for a wide range of wire diameters and lengths. Working from coil is also possible, up to M-24 (1").
■ These machines are easy to set-up, and are low maintenance.
■ The heavy-duty chamfer heads produce a clean smooth chamfer, and longer life of the chamfer tips.
■ The chamfers are cut dry, at high speed, without lubricant and the dry chips are then ejected out the machine, keeping the work area dry and clean. Stamping can be single, or double-end.
B-7 Stud machine from pre-cut bars
■ The machines accept pre-cut blanks, which can be fed automatically by an external feeder, or by a hand-feed magazine.
■ They are designed and constructed for production of small and medium size batches.
■ When working from long bars, We offer a quick-change feed table, and a bar shear that will cut the bars to a precise length, and remove the bar ends to a recycle bin.
■ An optional conveyor can be added, to feed the chamfered and stamped blanks into a thread roller, if required.